10Base2 network card, with configuration tool and standard NE2000 driver. Should be compatible with most operating systems. There is also a slot for a standard ROM.
Continue reading "Retro Net – Viglen Ethernet Accelerator PN: 142640-420 Rev-01E"
A 3Com 10 Mbit PCI network card from 1998. On the back, someone already left their mark in 1999. Views Facts Manual Source: Archive.org Drivers Source for drivers preserved here: Operating System DOS Windows Other Pack/CD Drivers X X X X Drivers for different operating systems DOS Windows Other Package Source: RetroWEB Other Network Types https://www.fambach.net/?p=12059 Conclusion Question …
Continue reading "Retro Net – 3Com Etherlink XL PCI 3C900B"
The card was used on late AT boards for the mouse and USB interface. ASUS and PCChips, in particular, used this type.
Continue reading "Retro Projekt – ATX Form Card"
This card isn't really retro, but it works with PCI. I couldn't find a packet driver for DOS, so a workaround was necessary.
Continue reading "Retro Net – DLink DGE-528T"
I acquired this card in a bundle from eBay. When I first saw it, I thought, „what on earth are these two SUB-D 9 connectors, that's not exactly standard.“ Then, when I randomly pulled it out of a box for the description, I thought the same thing again. It did ring a bell for Lantastic, though...
Continue reading "Retro Net – Artisoft LANtastic"
A Socket 7 motherboard for the Pentium I, with only one voltage, so up to 166MHz without MMX. The board has an Intel 8243xFX chipset. It only supports 72-pin FPM and EDO RAM, but has six slots for it, and up to 128MB. My 2x 32MB modules were also recognised. As the benchmark shows, this motherboard, with…
Continue reading "Retro Hauptplatine – GA-586ATE Rev 4.D"
The board started after a bit of a jump-start with contact spray. The Award BIOS is rubbish, but we'll surely find a better solution. The cache expansion is quite nice, unfortunately my 4MB SIMMs don't work with the board yet. Let's see what happens. Views Facts Manual BIOS TMS27C512 BIOS Chip The AMI BIOS found on RetroWeb works…
Continue reading "Retro Hauptplatine – FIC 486-HC-HD"
Predecessor to the Etherlink III card, unfortunately without an RJ45 connector. If you know how to do it, the card is quickly configured and easy to handle, even though it's still not clear to me how the IRQ is set. Please leave a comment if you know more.
Continue reading "Retro Net – 3Com Etherlink II/16"
Eine der wohl berühmtesten und beliebtesten Netzwerkkarten. Einfach einschalten, konfigurieren geht. Mit dieser Karte erschien Plug and Play das erste Mal wirklich möglich zu sein, auch war das Konfigurationstool ohne problem nutzbar.
Continue reading "Retro Net – 3Com Etherlink III"
Eine 486er Hauptplatine mit einem DX2 66 on Board. IDE Controller für zwei Festplatten und zwei Floppies sowie ein 2xCOM, LPT und Gameport sind auch schon an Board.
Continue reading "Retro Hauptplatine – HIPPO COM v2.1"