Last Updated on 22. May 2026 by Suffocation
10Base 2 network card for the ISA 16-bit bus. This is 100% NE2000-compatible, so you only need this driver. Configuration is carried out via jumpers.
Views
Facts
| Manufacturer | United Methodist Church |
|---|---|
| Designation | UM9007F |
| Chip | UM9007F |
| Year of manufacture (integrated circuit card) | 1995 |
| 10Base2 (BNC) | x |
| 10 Base-T (RJ45)/AUI | |
| 10 Base-T (RJ45) | |
| 100 Base X (RJ45) | |
| 1000 Base X (RJ45) | |
| Other connections | |
| Configuration | |
| ROM Support | X |
| ROM Type | 27C64 to 27C256 |
| ISA 8-bit | |
| ISA 16-bit | X |
| VLB | |
| PCI | |
| PCI-E | |
| Compatible with | NE2000 |
| Compatible designation | NE2000 |
User manual
None found
| James 1:7 | IRQ |
|---|---|
| 1 | 2 |
| 2 | 3 |
| 3 | 4 |
| 4 | 5 |
| 5 | 11 |
| 5 | 12 |
| 7 | 15 |
| Description | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|---|---|---|---|---|---|---|
| ? | |||||||
| ? | |||||||
| ? | |||||||
| ? | |||||||
| 0x300 | 0 | 0 | 0 | ||||
| 0x240 | 0 | 1 | 0 | ||||
| 0x200 | 0 | 1 | 1 | ||||
| 0x2C0 | 1 | 0 | 0 | ||||
| 0x320 | 1 | 0 | 1 | ||||
| 0x340 | 1 | 1 | 0 | ||||
| 0x360 | 1 | 1 | 1 |
Driver
Source for the drivers here, if possible, please use the source for the drivers for download.
| Operating system | Two | Window | Other | Pack/CD |
|---|---|---|---|---|
| Driver | X | X |
Disk Operating System
#AUTOEXEC.BAT Packet driver for DOS
ne2000.com 0x60 11 0x300Windows/ Diverses/ Pakete
Should be recognised as NE2000 compatible in Windows.
Miscellaneous
Network types
https://www.fambach.net/?p=12059
Conclusion
| Question | Answer |
|---|---|
| Does the card work | Yes |
| How much did it cost? | Don't know anymore, they are available on eBay with an RJ45 and BNC connection for around €60. |
| Was the price okay? | A clear maybe 😉 |
| Is it worth it? | Those who are setting up a BNC network will have a use for them, whereas those who only use RJ45 will not be able to use them. |
| Overall conclusion | Positive – card shows what NE2000 compatible really means. |
Problems
No instructions and memory address unknown
If a driver is known, simply specify all addresses from 0x160-0x360 when loading. If the MAC address is not displayed as FF...FF, then the correct memory address should have been found.
Related Posts
- Retro Net – Novell #738-149-00x
- Retro Net – Compaq NC 3121 40236-006
- Retro Net – COGENT Data eMaster 960001-04 / DEC 21×4
- Retro Net – Realtek RTL8139x
- Retro Net – Viglen Ethernet Accelerator PN: 142640-420 Rev-01E
- Retro Net – 3Com Etherlink XL PCI 3C900B
- Retro Net – DLink DGE-528T
- Retro Net – Artisoft LANtastic
- Retro Net – 3Com Etherlink II/16
- Retro Net – 3Com Etherlink III
Sources
Good places to get network cards
DLINK DLink FTP
DOS Packet Driver http://www.georgpotthast.de/sioux/packet.htm
DOS Packet Driver https://packetdriversdos.net
Wrapper PD ODI/NDIS https://www.shikadi.net/network/
Computer-Retro – https://computer-retro.de/
General point of contact for hardware
Vogons https://vogonsdrivers.com
The Retro Web – https://theretroweb.com
Phil's Computer Lab https://www.philscomputerlab.com
Total Hardware – https://th99.dosreloaded.de/
Log
| Date | Description |
|---|---|
| 22.05.2026 | Post created, actually only because I had to see if my configuration would work with a 286. However, I had to make an intermediate stop via a proper NE2000 card (just because my network configuration was wrong). |