LILYGO EP32 S2 V1.1
Here is a board from the Liligo family with the new ESP32-S2. I have already reported on the ESP32-S2 HERE. It is a USB-C board. The ESP32 is directly soldered. The board has an on/off switch and a LiPo battery regulator with a JST connector. A connecting cable was supplied for the JST connector. The antenna is not soldered but consists of a small metal frame. An external antenna can also be connected. It has three push buttons, a DIP switch, and an SD card slot.
Continue reading "LILYGO EP32 S2 V1.1"
