Motorbrücken zur Ansteuerung von motoren.
Found another motor shield on AliExpress, this one has an L298 motor driver. What's interesting is that the braking function and current measurement are brought out. What is a preview: As I'm losing track of the ordered hardware more and more, I'll write a small preview after ordering. Then, when I get to the hardware...
Continue reading "Preview – Arduino Motor Shield mit L298P"
Expansion board for the D1 Mini, compatible with a driver for two motors. Facts Description Name Pin I²C Clock SCL 5 (D1) I²C Data SDA 4 (D2) Motor A Connection 1 1A Motor A Connection 2 2A Motor B Connection 1 1B Motor B Connection 2 2B External Voltage VM (3 -10V) VM External Voltage GND GND I²C …
Continue reading "D1 Mini Shield – HR8833 Motor"
Motor control board for controlling two motors (6.6V – 38V) via the I²C bus. Facts: Supply voltage 6.6V – 38V. Maximum continuous current 2A (briefly up to 3.6A). Controls: Forward/Reverse (speed), Stop/Brake. Description: Name, Pin, I²C Clock, SCL, 5 (D1), I²C Data, SDA, 4 (D2), Motor A Connection 1, 1A, Motor A Connection 2, 2A, Motor...
Continue reading "D1 Mini Shield – AT8870 Motor"
I've had the Zumo for a few years now and just rediscovered it in a box. So I thought it would be nice to write a bit about it. The Zumo is a small mobile platform onto which you can directly plug an Arduino Uno or Leonardo. It has two motors and a few sensors…
Continue reading "Zumo V1.2"
This add-on board has an L298P motor driver on board. This allows two DC motors to be operated with up to 2A. In addition, the board also has a buzzer and some connections that have been brought out. See also the diagram in the next chapter. I will keep the test very short and only [mention] the buzzer and…
Continue reading "FunduMoto L298P High Power Motorbrücken"A new kit from AliExpress has prompted me to build a remote-controlled vehicle. The kit consists of an Arduino, an expansion board, and a PS2 controller with receiver. Components The chassis of the vehicle is formed by a kit from AliExpress LINK. This kit contains an acrylic platform with two motors, wheels, and some accessories. For control, I am using...
Continue reading "RC Auto mit PS2 Controller"
Based on my nRF contributions, and with the help of the Sunfounder remote control, I thought it would be nice to build a remote-controlled car out of it. This post describes what came of it. Areas of use: Fun for the kids and the dad 😉 Parts list: Car, drivable chassis, Arduino Uno, Motor Driver Board V2, nRF24 module + breakout board, Power supply…
Continue reading "NRF RC Auto"
Sales Name: 2018 Arduino Shield Expansion Board 6-12V with 4 Channels Motors Servos Ports PS2 Joystick Remote Control I bought the expansion board in a set including PS2 controller/receiver module, Arduino Uno and USB cable, from fast Ali for under €26. !!!To avoid a few mistakes beforehand, it makes sense to connect an external power source to the Arduino...
Continue reading "Arduino PS2 Controller Platine Grundlagen"
There is an expansion board with a motor driver for the NodeMCU V2. It allows two small motors (up to 1.2 Amperes) to be controlled via an L293DD motor driver. It is also possible to connect a stepper motor. Furthermore, it offers two separate connections for the power supply of the board and the motors. Most of the ESP pins are brought out with an additional ground/power pin, which makes connecting...
Continue reading "NodeMCU V2 Motorplatine"
The motor board is perfectly suited for small robot projects that use 2 to 4 drive motors.
Continue reading "Adafruit Motor Platine v1"